Your cart is empty

LY IR-PRO-SC V.3 BGA Rework Station

$820.00
PayPal Acceptance Mark

BGA rework station
LY IR-PRO-SC v.3
( HR + IR )
Upgraded model of IR-PRO-SC v.2
IR Power: 2500W
HR Power: 2800W
2011/5/15 release
if you like HR PRO SC, you can use the HR heating head; if you like IR PRO SC, you can use the IR heating head; ALL-IN-ONE BGA

sc-v.jpg

The version of this machine is 220V, so you also need a converter if the voltage in your area is 110V.

LY BGA Rework Station is designed to meet the increasing demands of today`s BGA Rework environments

Products apply to the welding of CBGA CCGA CSP QFN MLF PGA, all the green epoxy type BGA chip and other special parts such as metal shielding cover, plastic connector replacement of various and soft PCB.

Machine comes along with Manual and video demonstration CD-ROM,The information is easy to understand. Even if you have never engaged in BGA rework , it can be quickly mastered the technology

You’ll find its really the machine you need by its high integration Design, the smaller workbench, non-mixed cables and the convenient operation –all the process of soldering controlled by a button.

The height of Top heating head may adjust by rotating the handle. The Top Infrared heater could rework BGA ICs of large size up to 70*70mm.

The Linear guide type Bracket for BGA Reworks can be locked,adjusted by rotating the handle, It can fix PCB board easily, effectively prevent PCB board from deformation.

IR-PRO-SC can be connected to a computer with a built-in PC RS232 serial port. It can be controlled by the software. it can set up 8 rising temperature segments and 8 constant temperature segments to control. It can save 10 groups of temperature curves at one time

The fan could cool the PCB fast and efficiently. Large ir bottom heater(260mm*245mm)could heat the PCB evenly to avoid its deformation. The rate of successful soldering is higher.

The top&bottom temperature areas heat independently. The sensitive temperatrue sensor could get the accurate data and the instantaneous information.. The closed-loop temperature control system offers the alarm funciton and the cutting of the power supply automatically.

The innovative design gets over the problem of ir heating rework station heating slowly and disorderly caused by the air flow. It can easy deal with the solder free soldering. The max temperature is up to 400 °C.

 

 

SAM_1200.JPG

SAM_1246.JPG

SAM_1237.JPG

 

SAM_1224.JPG

SAM_1218.JPG

SUC55657.JPG

SUC55656.JPG

SUC55659.JPG

SUC55665.JPG

SUC55663.JPG

SUC55660.JPG

SUC55667.JPG

SUC55666.JPG

 

1.JPG

3.JPG

 

2.JPG

6.JPG

4.JPG


Add to Cart:

  • Model: V.3
  • Shipping Weight: 45kg
  • 8 Units in Stock