Your cart is empty

KEY25 2.5" USB3.0 Encrypted HDD Enclosure with Keypad

PayPal Acceptance Mark
Encrypt key lock sata hdd enclosure sata hdd case with password setting function USB3.0 hard disk box high speed shockproof case
Product Introduction:
The product is a kind of high speed data exchange through USB port and the large capacity storage devices&mobile encryption,it can be used for desktop computer or notebook computer via a USB port. Support USB3.0 standard, compatible and connected to the USB 2.0, etc. This product can be below the operating system of the support plug and play without installing driver.
System Requirements:

Hardware system:
♦ Support maximum 4gb/2.5”Hard disk
♦ USB 3.0 or USB 2.0 Jack
♦ AES256 XTS hardware encryption
♦ Support Minimum 200MHz Intel Pentium microprocessor
♦ Minimum 64MB RAM
O.S. Support:
♦ Microsoft® Windows Vista®
♦ Microsoft Windows 2000
♦ Microsoft Windows XP
♦ Microsoft Windows 7
♦ Microsoft Windows 8
♦ Linux Fedora FC8
♦ MAC OS 10.6.2
♦ Android                                     
Product Features:

1. The length of password can be unlimited or null.
2. It's different from the others Encrypted disk box in the market of HDD and PCBA is corresponding to the hard disk box, when PCBA broken must be returned to the factory repair, and the program is damaged, replace the same PCBA cannot read data, but this product as long as the replacement of the same PCBA, enter the password can read HDD data.
3. AES256 XTS hardware encryption
Hardware encryption is different from the software encryption when the HDD is removed to receive any other place such main-board or other hard disk box cannot be read HDD data.
Installation and partition for the Hard disk:

1. Initialization and Password setting 
When get  a new hard  drive , we  have to  initialize it,  specific steps  are as follows:
Before connecting the hard disk to the power source, press the number 1 and 3 at same time, when you press for 20 seconds, you can see the green light flashing and the red indicate light begin to flashing after 20 seconds.If the red and green indicate light lasting flashing,it show your cooperation is succeed. Otherwise, it means your operation failure.At this time you have to check whether the hard disk’s data cables plugged or long press(about 20 seconds). You check everything is ready, do the same operation as before to the step 2.
2. After you finish the step1, you should press the cancel key for 5 seconds when the yellow indicate light is flashing.Now you will see three lights is on working:Green/Red/Yellow. Otherwise,you should start from the step1.
3. Before you setting keyword,you must see the three lights be work,your keyword can be any length or any number as your like,after you setting your password,the blue indicate light is die out,at same time go on enter your password again,if your press same password,the red indicate light is die out,the blue one on working,it show you succeed.

Please click here to download the manual.

Please click here to view the video.

Add to Cart:

  • Model: KEY25
  • Shipping Weight: 0.1kg
  • 99 Units in Stock